:: 05-10 Ford Mustang Headers & Exhaust Systems ::


2005 Steeda Silver Q - JBA Equipped
331.1 hp - 330 lb.ft
0-60 4.9 sec, 1/4 mile 13.5 @ 106.9 mph
Download MPEG clip Video 1(1.6MB) Video 2 (2MB)

The new Ford Mustang one of the most popular vehicles on the road today. All of the articles, car shows, and sneak peaks have put the new car in high demand. With 300hp on tap and an improved suspension to help get the power to the ground, the new Mustang is a runner! Given JBA's roots and long standing history as a leader in Mustang performance - we had our sights set on developing performance exhaust products for America's favorite new hot rod long before it hit dealer show rooms. JBA has the most complete offering of exhaust packages for the ‘05-'09 Mustang including new long tube headers, Cat4ward® headers, H-pipes and after-cat exhaust systems. With these precision made components you will see gains of 23.4 HP / 28.3 lb.ft. at the tires.

:: JBA Cat4ward® Headers 05-10 Ford Mustang 4.6L 3v V8 ::

1675SJS
Click to enlarge
JBA Cat4ward® Headers p/n 1675SJS

JBA is proud to announce the release of new 50 state smog legal* Cat4ward® headers for the new Mustang GT. These new V8 headers feature JBA's standard heavy-duty construction and patented technology to deliver the performance and reliability you expect. Beginning with oversized "D" shaped ports for the new 3v heads and smooth flowing mandrel-bent tubing - these headers open up the exhaust for increased performance and efficiency without compromising the factory emission equipment. Extra thick 3/8" CNC laser-cut flanges ensure a tight seal and trouble free performance without leaks from warping. Each kit comes complete with quality hardware and instructions for a complete installation.

2005-2010 CARB EO# D-57-34
P1

*This Product has been granted a California Air Resources Board (CARB) “E.O” (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.


 

:: JBA Cat4ward® Headers ::

4.6L V8 1-5/8" Stainless steel (shown)

1675S

4.6L V8 1-5/8" Silver ceramic coated

1675SJS

4.6L V8 1-5/8" Titanium ceramic coated

1675SJT

::Header Features::
  • 3/8" thick laser-cut flanges
  • Mandrel-bent Stainless steel primary tubes
  • Patented JBA Firecone® merge collector
  • Premium quality hardware
  • Bolt-on installation
  • Optional ceramic coating (thermal barrier)
:: JBA Cat4ward® Headers 05-10 Ford Mustang 4.0L V6 ::

1617S
JBA Cat4ward® Headers p/n 1617S - Click to Enlarge Download the 5.0 Mustang & Super Fordsbolt-on article for the '05 V-6 Mustang Click here

Make your new V6 Mustang run like a GT with JBA's new JBA Cat4ward® headers. The new 4.0L V6 is a big improvement over the old 3.8L with increased power and torque. Combined with the new Mustang chassis and transmissions - the base Mustang feels almost as strong as some of the older GTs. But the restrictive factory exhaust manifolds hold it back. JBA has extensive experience with the 4.0L V6 and set out to build headers that will open up the exhaust flow to allow the engine to breathe more efficiently. The result is a new Cat4ward® header system that features JBA's heavy-duty construction and patented technology to deliver the performance and reliability you expect. Starting with an oversized exhaust port and smooth flowing mandrel-bent tubing - these headers open up the exhaust for increased performance and efficiency without compromising the factory emission equipment. Extra thick 3/8" CNC laser-cut flanges ensure a tight seal and trouble free performance without leaks from warping. Each kit comes complete with quality hardware, gaskets and instructions for a complete installation. Note: These are the only headers available for the 2005 Mustang V6 that are 50 state smog legal. Another JBA first.CARB E.O.# D-216-28. Available Now!

2005-2010 CARB EO# D-57-34
P1

*This Product has been granted a California Air Resources Board (CARB) “E.O” (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions.


 

:: JBA Cat4ward® Headers ::

4.0L V6 1-1/2" Stainless Steel

1617S

4.0L V6 1-1/2" Silver ceramic coated

1617JS

4.0L V6 1-1/2" Titanium ceramic coated

1617JT

Explanation of available header finishes

::Header Features::
  • 3/8" thick CNC laser-cut flanges
  • Mandrel bent primary tubes
  • JBA Sealing Dome™ collector
  • Premium quality hardware and gaskets
  • Bolt-on installation
  • Optional ceramic coating (thermal barrier)
:: JBA Long Tube Headers ::

6675S
Click to Enlarge

 

3

*This product is Not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations and is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle

For maximum performance gains on your new Mustang GT, JBA has a complete stainless steel long tube header system that delivers more power and torque than any other header system. These new headers take full advantage of the redesigned chassis and new engine. The trick "D" port aluminum heads on the 4.6L 3v can breathe easier through JBA's 1-5/8" mandrel-bent stainless steel primaries freeing up massive amounts of horsepower and torque. JBA's one-piece 3/8" CNC laser-cut flanges make a tight and durable seal for trouble-free performance. The pipes terminate in a 9" long collector that houses JBA's patented Firecone® merge device for enhanced scavenging of exhaust gasses. These headers fit perfectly inside the frame with no loss in ground clearance.

*for off-road use only. Not legal for use on emission controlled vehicles.

 

:: Long Tube Headers ::

1-5/8", 2-1/2" collector Stainless steel

6675S*

1-5/8", 2-1/2" collector Silver ceramic

6675SJS*

1-5/8", 2-1/2"collector Titanium ceramic

6675SJT*

1-5/8", 3" collector Stainless steel

6673S*

1-5/8", 3" collector, Silver ceramic

6673SJS*

1-5/8", 3" collector Titanium ceramic

6673SJT*

Explanation of available header finishes

:: Header Benefits ::
  • Increase hp & torque throughout RPM range
  • Improved throttle response
  • Quicker rev
  • Amazing sound
  • Reduced under hood temperature
  • Improved exhaust scavenging

* results may vary

:: Header Features ::
  • 3/8" thick laser-cut flanges
  • Mandrel-bent stainless steel primary tubes
  • Patented JBA Firecone® merge collector
  • JBA Slip-fit™ collector
  • Premium quality hardware
  • Bolt-on installation
  • Optional ceramic coating (thermal barrier)
:: JBA Mid-Pipes for Long Tube Headers ::
:: H-pipe ::

2-1/2" Off-road H-pipe (shown)

6675SH*

2-1/2" H-pipe with cats

6675SHC*

3" Off-road H-pipe

6673SH*

* For off-road use only.
Not legal on emission controlled vehicles.


JBA 2 cat H-pipe for use with JBA long tube headers
p/n 6675SHC shownClick to Enlarge

3

*This product is Not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations and is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle

JBA Power Cables™ Ignition Wires:: 05-10 Ford Mustang 4.0L V6

For more performance on your Mustang, you will want to upgrade your ignition wires to a set of JBA PowerCables™. Each set is custom tailored to your Mustang so you get a perfect fit every time. JBA's performance ignition wires feature ultra-low resistance wire-wound mag conductors that allow more spark energy to reach the spark plug without electronic interference. JBA Powercables™ come with 100% silicone jackets for great resistance to high heat as well as abrasion and tears. The high heat boots give plenty of clearance for routing around the headers. Each wire is pre-labeled with the appropriate cylinder I.D for easy installation. The editors at Car Craft made an extra 5 hp on a project engine with a set of 9mm JBA PowerCables™. They look great under the hood too. Available now. Order yours today!


JBA Power Cables™ Ignition Wires p/n 06759 - Click to enlarge

:: JBA Power Cables™ ::

Part No.

2005-10 Mustang 4.0L V6 9mm Blue

06759

:: JBA Performance Exhaust Systems 05-10 Ford Mustang 4.6L 3v V8 ::


Click to Enlarge
2005 V8 Mustang Exhaust Systems - Click here

When Ford designed the new Mustang - they injected a lot of the classic Mustang legend and style. The factory Mustang sound system uses 2-1/2" tubing that flows reasonably well but the mufflers choke up the performance with back pressure because they are designed to quiet the car. JBA has the solution with an easy to install axle-back exhaust system with the true "DNA" sound of a Mustang. It features JBA's fully welded chamber style mufflers and chrome plated stainless steel tips. Hangers are pre welded in place to use the factory mounts. With a slip fit connection - this system can be installed in less than 1 hour. Get the power, sound and quality you need with a JBA performance exhaust!

Dual Rear Exit

Stainless

V8 2-1/2" Axle-back System w/ 3" rolled lip tips

40-2627

V8 2-1/2" Axle-back System w/ 4" Dual Wall tips

40-2629

V8 3" Exhaust System w/ 3-1/2" rolled lip tip s- For use with stock exhaust system

40-2632

V8 3" Exhaust System w/ 3-1/2" rolled lip tips - For use with 6673SH H-Pipe

40-2633

V8 3" Exhaust System w/ 4" Dual Wall tips - For use with stock exhaust system

40-2639

V8 3" Exhaust System w/ 4" Dual Wall tips - For use with 6673SH H-Pipe

40-2640

See a dyno run with JBA's supercharged
project 2005 Mustang Download (520KB)

:: JBA 2005 Mustang GT - SEMA Project ::


For more photos of the JBA Project 2005 Mustang
Equipped with JBA 6675S long tube headers, 6675H

off-road h-pipe, 40-2627 exhaust system, Vortech

SQ supercharger, 20 x8 / 20 x 10 SAF Forged wheels, Toyo Proxes T1-S tires, Vogtland lowering springs, Custom graphics by Modern Image.

How does it sound? Where to buy?

2005 Mustang GT Auto - Supercharged
with JBA Axle-back Exhaust System p/n 50-2627
Rev and accel (MP3)
Passing (MP3)

2005 Mustang GT Auto - Supercharged
with JBA Headers p/n 6675S, JBA H-pipe p/n 6675H, and JBA Axle-back Exhaust System p/n 50-2627
Idle and rev (MP3)

::Dealer locator::
Find your nearest distributors

::Shop Online::
For a listing of online distributors

JBA Performance Exhaust Systems:: 05-10 Ford Mustang 4.0L V6

Every Mustang owner craves the power and sound of a V8. JBA has the solution for V6 Mustangs with easy to install exhaust systems that deliver a powerful sound that won't be confused with a sport compact. JBA's new dual exit exhaust system will have you running with the V8's. This kit features JBA's fully welded chamber style mufflers, high flow mandrel-bent tubing, hangers and hardware and great looking 3" chrome plated stainless steel tips. Get power, sound and quality with a JBA performance exhaust! Available Now!


JBA Dual Exit Exhaust p/n 40-2631 - Note: This kit designed to fit with a GT bumper or a V6 bumper trimmed for tip clearance. Download the 5.0 Mustang & Super Fordsbolt-on article for the '05 V-6 Mustang Click here

How does it Sound?

Idle & Rev

Accelerating

:: JBA Exhaust ::

Stainless Steel

V6 2-1/2" dual exit w/ Y-pipe and 3" tips

40-2630

V6 2-1/2" dual exit w/ H-pipe and 3" tips

40-2631


p/n 40-2630 - Click to enlarge


JBA Equipped p/n 40-2630 - Click to enlarge



JBA Axle-back Exhaust p/n 40-2628

JBA' s axle back exhaust is an affordable upgrade that delivers a healthy rumble and opens up exhaust flow for more power. The kit features JBA's fully welded chamber style muffler and a great looking 3" chrome plated stainless steel tip. Hangers are pre welded in place to use the factory mounts. With a slip fit connection - this system can be installed in less than 1 hour. Get the power, sound and quality you need with a JBA performance exhaust! Available Now!

::How does it Sound?

Idle & Rev

Launch

Drive by

:: JBA Exhaust ::

Stainless Steel

V6 2-1/2" Axle-back System w/ 3" rolled lip tips

40-2628

::Dealer locator::
Find your nearest distributors

::Shop Online::
For a listing of online distributors