Featured Product:: 2007-2012 Toyota Tundra 4.7L and 5.7L Trucks

Featured Product: 2007-2012 Toyota Tundra 4.7L & 5.7L

The Toyota Tundra has always been recognized for its value, quality and reliability. For '07-'012, Toyota has unveiled a completely redesigned product that is bigger and more powerful with a completely new look. It is bigger in every metric direction and has the ability to tow over 10,000 pounds. To unleash even more power, JBA has designed performance headers and exhaust systems engineered and tuned to provide yor truck with maximum torque and horsepower.

NEW!! ::2007-2012 Toyota Tundra 5.7L Headers

Over the years,Toyota trucks have grown in size and performance to go head-to-head with the best Detroit has to offer. With the Tundra equipped with class leading and cutting-edge features, it's no wonder they are popular with enthusiasts. The all new '07-'12 Tundra is no different. But just like Toyota, JBA believes in taking something good and making it better. Specifically, the high-tech 5.7L and 4.7L engines in these trucks. The factory exhaust manifolds and exhaust systems are restrictive and have inefficient designs that keep the engine from reaching it's maximum potential. Our engineers designed matched performance headers and cat-back systems that open up the exhaust flow with a powerful, but not offensive sound. Low-end torque and high RPM peak power are greatly improved for wide open performance. These components feature "bullet-proof" construction and JBA's patented technology for long lasting performance and reliability. Nothing else comes close. Power, sound and quality - JBA has it all.

P1

*The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission-controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles), per the manufacturer’s application guide.

 

 

::Header Features::
  • 3/8" thick laser-cut flanges
  • Mandrel-bent stainless steel primary tubes
  • JBA sealing rings on head flange
  • Provisions for all factory emissions equipment
  • Premium quality hardware included
  • Will not void factory warranty
  • Optional ceramic coating (thermal barrier)

 

 

::Header Benefits::
  • Increase hp & torque throughout RPM range
  • 50 State Smog Legal (EO# PENDING)
  • Improved throttle response
  • Reduced under hood temperature
  • Increased passing power
  • Increased low-end torque
  • Makes engine more sensitive to other modifications (intake, chip, supercharger, etc.)
  • Improved engine compartment appearance
  • Improved fuel economy*

* results may vary

::2007-2012 Toyota Tundra 5.7L Headers::

Application

Stainless

Steel

Silver

Ceramic

Titanium

Ceramic

'07-'09 Tundra 4.7L,
1-5/8" tube, Stainless Steel

2013S

2012SJS

2012SJT

'07-'12 Tundra 5.7L,
1-5/8" tube, Stainless Steel

2012S

2012SJS

2012SJT

For more header applications

::Dealer locator::
Find your nearest distributors

::Shop Online::
For a listing of online distributors

NEW! :: 2007-2010 Toyota Tundra 4.7/5.7L Exhaust Systems


p/n 40-9003

There's no questioning the high level of quality work that Toyota's engineers have put into the redesign for the new Tundra. However, they designed the truck to run with a whisper quiet exhaust system that muffles the powerful i-FORCE V8 hidden under the hood. JBA rose up to the challenge and engineered two brand new exhaust systems for the new Tundra: a giant 3" single side exit exhaust system and a a beautiful dual exhaust setup that splits out to both sides of the truckbed. Both components feature free flowing mandrel bent tubing, JBA's fully welded stainless steel muffler, and a clean looking polished chrome plated stainless steel rolled-lip tip. The result is a nice increase in horsepower and torque throughout the RPM range and the tone that true V8 truckers crave.

::2007-2012 Toyota Tundra 4.7/5.7L Exhaust ::

Application

Stainless Steel

'07-'10 Tundra 4.7/5.7L

Double Cab / Long Bed

Single Side-Swept Exit

40-9003

'07-'12 Tundra 4.7/5.7L

Double Cab / Long Bed

Dual Side-Swept Exit

40-9004

'11-'12 Tundra 4.7/5.7L

Double Cab / Long Bed

Dual Side-Swept Exit

40-9005

For more exhaust applications

P1

*The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards), racing use or for use on pre-emission-controlled motor vehicles/motor vehicle engines (pre-1966 domestic vehicles certified to California standards, pre-1968 domestic vehicles certified to federal standards and all pre-1968 foreign vehicles), per the manufacturer’s application guide.

 

::How does it sound?::

Idle and rev

Rev and acceleration

More exhaust sounds

 

 

 

 

2007 Toyota Tundra 4.7L

 

 

2007 Toyota Tundra 4.7L with 40-9003